CUSTOM MANUFACTURING
Contact Our Product Manager:
- Phone:+86 (0)21 6536 5235
- Contact: Send E-Mail
Solvent-free Anti-pollution Flashover Coating
Ultradry APF-SU
Solvent-free Anti-pollution Flashover Coating
Ultradry APF-SU Solvent-free Anti-pollution Flashover Coating is a two-component, low-viscosity, single-layer super-hydrophobic, self-cleaning coating. Has excellent super-hydrophobicity, superoleophobicity and hydrophobic migration properties, this enables it continuously maintain the superhydrophobic performance of the coating surface without attenuation in a high-humidity environment, and at the same time has excellent anti-dust adhesion performance, improve the insulation capacity of the power grid and effectively prevent surface flashover breakdown accidents caused by contamination and condensation.
Ultradry APF -SU has good resistance to UV aging, acid and alkali corrosion, salt spray erosion, etc., and can maintain its superhydrophobic, self-cleaning and anti-condensation properties for a long time under different natural environmental conditions.
Ultradry APF-SU Solvent-free anti-pollution flashover coating is used to protect the enclosed electrical equipment in the power industry, such as ring main units, switch cabinets, cable branch boxes, box-type substations, etc.
Index:
| Number of groups: | Two-component |
| Pigment: | White |
| Iustre: | Matte |
| Solid content: | 10±2% |
| Surface drying time: | 30 min |
| Bone drying time: | 7 Days |
| Water contact Angle: | > 150° |
| Mix weight ratio: | 20:1 |
| Density after mixing: | 0.82 kg/L |
| Recommended membrane thickness: | 20-40 μm, adjustable film thickness according to actual requirements |
| Theoretical coating rate: | Regardless of the loss factor, the theoretical spread rate is approximately 0.25kg/m² |
| Coating method: | Compressed gas spray, plug-in/lithium-ion spray gun spray, etc |
| Operating temperature: | It can be used in environments below 200° for a long time without peeling or flaking |
Health and safety:
- Safe Use Technical Data Safe Use technical data can be found in the Chemical Safe Use Data Sheet (MSDS).
- The paint is solvent-based and should be handled with care. Inhalation of paint mist and contact with skin or eyes of wet paint should be avoided. If it accidentally splashes onto the skin, rinse immediately with an appropriate detergent, soap and water. If it accidentally gets into the eyes, rinse thoroughly with water and seek medical attention immediately.
- When applying paint in confined Spaces, ensure good ventilation and lighting.
- If on-site personnel are working in an environment with a concentration higher than the above explosive limit, they must each be equipped with complete personal protective equipment (PPE).
Explore more of our other Anti-condensation Coating products:
24 months; Store in a cool, well-ventilated, dry place away from heat sources and ignition sources.
For more details and safety recommendations regarding the use of the product, please consult our Material Safety Data Sheet (MSDS), or Contact With our Product Manager.
LEAVE MESSAGE
Leave message to our Product Manager for more information on application consultation, sample support, pricing etc.
We are more than happy to answer your questions within 24 hours.
